Grizzly Jointer 6" x 47" G11822HW 2 Series
Our March Guild meeting will be hosted by Tim Carney on Monday, March 7th at Helena Hardwoods. Our meetings begin at 5:30 and usually go til about 8 pm or 8:30.
Our January Guild Meeting will be hosted by Dan McCardle at his shop.
Hello Wood Enthusiasts and Professionals Alike,
Paul has restored a circa 1948 scroll saw that should be interesting to check out. 
Our March meeting will be hosted by Chris Yahvah (those are photos of his shop, left.) The meeting will be at 5:30 pm on Monday March 1st.
Chris will share his knowledge of the horizontal router and his top secret and much used router setup.
Guild members, please note, Chris Yahvah has a new email address: cyahvah(at)gmail(dot)com
MEETING DETAILS:
Date: Monday, March 1, 2010
Time: 5:30 pm til or 8 or 8:30 pm
Place: 6153 Lazyman Gulch at Chris Yahvah Cabinets
Food: Chris will provide a spaghetti main dish. Members, please bring a side dish and something to drink.
Our January meeting will be hosted by Tim Carney. The meeting will be Monday January 18 at 5:30 pm.
We will watch a video, Sharpening Simplified on the basics of sharpening hand tools.
Everett Ellenwood says of the dvd, "Having trouble getting your carving tools razor sharp? In Sharpening Simplified, I show you simple proven method to get your carving tools properly contoured and sharp, each time you sharpen them."
Tim will also show us a few of the projects available for us to help with the trolley restoration project we visited at our last meeting.
Date: Monday, January 18, 2010
Time: 5:30 pm til or 8 or 8:30 pm
Place: 3025 East Bozeman Avenue at Timothy's Fine Woodworkng
Food: Tim will provide the main dish -- most likely a big pot of homemade soup that'll go warm us up in this cold weather. Members, please bring a side dish and something to drink.
Directions: To get to Tim's shop, take Highway 12 East to Carter Drive (just east of Walmart) Turn north on Carter Drive. Go over the railroad tracks and take a right on Bozeman. His shop is less than 1/4 mile from Carter Drive -- it's on the southwest corner of the tan building.
Our December meeting will be hosted by the Lewis and Clark County Historical Restoration Committee. Not only will be have an opportunity to view the Trolley Car #3 preservation project, but dinner will be provided by the committee, so please join your fellow woodworkers and our host, Rich Palmer, Monday evening.
Rich will give a talk about an ongoing committee project, the restoration of trolley car #3; then we'll go by bus to see the trolley preservation project and be bused back to the Great Northern Town Center.
Date: Monday, December 7th
Time: 5:30 pm til or 8 or 8:30 pm
Place: 845 Great Northern Boulevard
Food: the Lewis and Clark Historical Preservation Committee is providing dinner. All you have to bring is yourself and your curiosity. Can't pass this up!
Photos are from the Lewis&Clark Historical Preservation Committee website here.
We'd like to invite everyone to attend our 6th annual Art of Wood Exhibit on Friday, November 13th, at The Placer, in Downtown Helena. The exhibit will be open during the 2009 Fall Art Walk from 6 to 10 pm.
Guild members, please remember to bring appetizers or dessert between 5 pm and 6 pm, so we can continue our tradition of having the best spread on the ArtWalk.
See you all there!
Our September meeting will be held September 22nd at Will Rex's shop. This is our first meeting since our summer hiatus and we hope all of our guild members take the time out from your busy schedules to get together at Wills.
Please join your fellow woodworkers as Will shows us how to sharpen a hand saw and gives us a tour of his shop.
We will also discuss the upcoming Fall Art Walk and our 5th Annual Art of Wood Exhibit. We would love to see everyone there to start our year off with lots of great energy.
Date: Tuesday, September the 22nd
Time: 5:30pm til about 7:30 or 8 pm
Food: Will is providing pizza -- yay! Please bring a side dish and something to drink. Since its getting much harder to recycle glass we suggest you bring beverages in cans rather than bottles. Moose Drool and Kettle House (from Missoula) have good beers available in cans now. There's also the usual pop and tea in cans or water in plastic bottles (these can be recycled too.)
Also, parking is limited at Will's so please carpool if you can. Thanks!
Directions: Take I-15 south to the Montana City Exit. Follow frontage road south approximately 4 miles until it snakes left crossing Prickly Pear Creek and continuing under the interstate. Continue south for 1/2 mile more, look for the large green sign indicating Gruber Estates on the left. Turn left and head up Hanging Tree Gulch for 1/4 mile. Will's is the green house on the right, tucked off the road.
Click Here for a larger map
Remember, our meeting will be on a Tuesday instead of our usual Monday.
Photo above is from Will's website, Golden Stone Carpentry ... kitchen cabinets by Will Rex
The Guild is providing the entire meal, including beverages. We'll eat in the large conference room off of the library's new lobby. Again, please do not bring your own beverages this time -- the library does not allow alcohol on the premises. The meal is on us!
Our February meeting was fantastic -- Bill Daigle did a great job of teaching us the basics of a simple, free CAD-like program, Sketchup. Maureen was scheduled to show us how to get around on Facebook and our guild website, but she was stricken with a nasty flu and wasn't able to make it. She'll be here at our March meeting to try it again.
Maureen will give us hands-on practice using the Guild's websites and Facebook network (left)
Basics to be covered by Maureen will include setting up online photo storage, uploading photos, setting up simple websites for members who do not have an online presence, and registering for your own Facebook page so that you can participate in the Guild's Facebook activities and announcements. Please consider checking this out even if you don't think you'll spend much time on Facebook or the guild's website. There are many ways you can make use of the Guild's online offerings, not only for participating in Guild activities, or to promote your woodworking hobbies or businesses. With your own web site or Facebook page, you can share your woodworking with your friends and families.
Please come -- we'd like to see a great turn-out. If you're not a member but want to know what we do, or how to use the internet to further your woodworking interests, you are welcome to attend.
You cut yourself with a chisel and you’re more concerned about not getting blood on your workpiece than you are about the laceration.
You inexplicably find sawdust in your drawers. And I’m not talking about furniture.
You have dropped to your knees and looked beneath a table in a museum, a gallery, an historic home, or a friend’s house.
You cannot resist the temptation to lift the lid on a wooden box.
You can talk to your partner/spouse/significant other for HOURS about woodworking despite the glazed over look in his/her eyes.
You can spend an entire day in your shop, accomplish little if anything, and thoroughly enjoy it.
You know exactly where everything is in your shop....except for a pencil.
You have built more projects in your head than in actuality.
Your spouse/partner/lovedones/pets know not to bother you, and sometimes choose to run for cover, when you are gluing up a project.
You remove more splinters from your hands in a month than most people do in a lifetime.
You can correctly pronounce Padauk and Lignum Vitae.
Our February guild meeting will be held late in the month this time -- we are scheduled for Monday, February 23 at the Lewis and Clark Library. We have the large conference room scheduled from 5:30-8:30pm and the computer lab scheduled from 6-8 so we'll be in both rooms after our social time and meal.
The Guild is providing the entire meal, including beverages. We'll eat in the large conference room off of the library's new lobby. Please do not bring your own beverages this time -- the library does not allow alcohol on the premises. The meal is on us! 
Bill Daigle will demonstrate the basics of Sketchup, which he uses to design his woodworking projects. The library will have the software loaded onto computers in the lab, so we can follow along with Bill on the overhead monitor.
There are 10 student stations in the lab, so plenty of computers for us to share. Even if you don't know how to use a computer, you might like to see what can be done with computer-aided-drafting/drawing and design.Maureen will have at least two computers set up in the conference room, to give us hands-on practice using the Guild's websites and Facebook network (left)
Basics to be covered by Maureen will include setting up online photo storage, uploading photos, setting up simple websites for members who do not have an online presence, and registering for your own Facebook page so that you can participate in the Guild's Facebook activities and announcements. Please consider checking this out even if you don't think you'll spend much time on Facebook or the guild's website. There are many ways you can make use of the Guild's online offerings, not only for participating in Guild activities, or to promote your woodworking hobbies or businesses. With your own web site or Facebook page, you can share your woodworking with your friends and families.
Another simple SketchUp sketch with the final product below:
Our January Guild meeting will be held at Tim Carney's shop at 3025 East Bozeman Avenue on Monday, Jan. 19th at 5:30 pm. Tim will provide a main dish.
Members, please bring a side dish (salads, garlic bread, dessert) or something to drink.
Tim will demonstrate the 32mm system (European system for cabinet making.)
He also has a table for members to view and critique. The table will be featured in the upcoming Live Auction benefiting the Florence Crittenton Home at it's annual black-tie fundraiser, Pink.
Directions to Tim's shop: Heading east on Highway 12, pass Walmart and turn left (north) on Carter Drive. Go over the RR tracks, turn right (east) on Bozeman Avenue. Tim's shop is 3025 East Bozeman Avenue. You'll see all the trucks unless you're the first one there.
Our December Woodoworkers Guild meeting will be held at Mike Flanagan's shop at 2925 Castle Rock Rd, on December 15th at 5:30. Mike will provide a spaghetti main dish. Members, please bring a side dish (salads, garlic bread, dessert) or something to drink.
Mike will be giving a sharpening demo.
Directions to Mike's: Head east on Canyon Ferry Roadd from Costco about 4 miles to Wylie Drive. Ttake a left heading north 1-1/4 miles to Castle Rock Road. Take a left and an immediate left again, heading back to the shop. The shop is a large green building with a white roof.
To see a map of Mike's address, double-click on the Google Calendar in the sidebar (right) on the Dec. 15th square and it should take you to our Guild's calendar where you can see and print a map.
Just a quick update on our November event -- the Art of Wood Guild Exhibit during the Downtown Helena ArtWalk was the hit of the evening. Held in the Placer building which is being remodeled as condos and an elegant lobby with fireplace, soaring ceilings and balconies and tile floors, we had a huge crowd coming in off of the walking mall. Our legendary refreshments and wine were nearly gone after the first hour. And the woodworking exhibited in the show was exceptional. Our exhibit just keeps getting better and better. Maybe we should consider doing it twice a year -- the Spring ArtWalk is always fun ... :-)
Here are a couple of shots from the exhibit evening. I'll try to post an article with more photos as soon as I have time. Thank you to everyone who participated and helped.
At our September meeting our members decided we wanted to have a Dump Pile to use as a way to barter, sell or just get rid of woodworking stuff and materials we no longer want. This might include hand tools, power tools, shop machines, extra wood, cabinet doors and drawers, old woodworking magazines, instructional videos, anything you can think of.
The first few items in the Dump Pile are just for samples of how our pile will look once people start adding stuff.
If you would like to participate in the Dump Pile, please send Maureen your email address and you will be invited to become a member of our Woodworkers Dump Pile, which is actually a wiki (explanation of exactly what a "wiki" is, will be forthcoming at an upcoming meeting.) For now, once you get the invite to the dump pile, just follow instructions and you can add your items, or respond to anyone else who has items for free or barter.
You will also be able to participate in discussions, ask questions and answer other guild members' questions, and upload files, photos and documents to our wiki. That means you will be able to add your email address, your phone numbers and shop addresses to our master-members-list. This will be immensely helpful to our communications.
Also, if you sign up for email updates at the DumpPile (see screenshot, left) you will get notices when someone wants your items, or when someone puts up a new item.
Please add items as soon as possible so we can get this going.
I will eventually put the dump pile logo/badge in our website sidebar so it will always be handy to click on and see what's new in our dump pile.
Thanks for making our guild website and our guild a vital, dynamic club/online network.
We recently received a tip from Greg Tarrant of Australia, an online handcut dovetail template & calculator. (screenshot, left)
Give it a try and let us know what you think of it by commenting below this post.
The Blocklayer website (Greg's site) has a long list of online construction calculators, which might come in handy for any of our members. The site is unfortunately full of ads, but if you are careful where you click it looks like it might be useful.
To get a list of calculators related to woodworking, do a search in the upper right of this page and the results take you to a short-list.
Enjoy!
Our meeting last night was hosted by Tom Doland in his (very organized and clean) woodshop. Tom had cooked a delicious stew -- reminiscent of chili, but better -- on his shops wood cookstove.
As always, our meeting started out with informal chewing the fat, catching up with each other and checking out some of Tom's woodworking.
The business part of our meeting was mostly about the upcoming Art of Wood Exhibit which will take place November 14th during the Helena Fall Art Walk. This year the show will be up for only one night -- November 14th, and not the entire month of November as it has been in the past. This is because the Myrna Loy Center is undergoing renovations and we had to find another venue for our show.
If you weren't able to attend the October Guild meeting, below are some important dates and facts to know. If you have any questions, please contact one of the exhibit committee members, or Tim Carney.
ART OF WOOD set-up and reception:
Thank you to Priscilla and to Lance Seaman, outgoing Secretary, for all of your hard work over the last couple of years.
And thanks for sure, to Tim Carney, for agreeing to continue as Guild President. Tim has really brought the guild in a good direction since he became president a couple of years ago.
The Helena Woodworkers Guild continues to grow and evolve, every year we greet lots of new members and figure out ways to function as a source of woodworking education, networking, and support for all of Helena's woodworkers. If any of our members know of someone who is not already coming to our meetings, or aware of our activities, please invite that person to attend our meetings as your guest. We are also very interested in welcoming young woodworkers and youth who might be interested in woodworking as a career or hobby.
Good Luck to our new officers and again, thanks to our outgoing officers.
The October Helena Woodworkers Guild meeting will be held at Tom Doland's shop at 140 Fairway Dr. on October 13th at 5:30. Tom will provide a main dish so bring a side dish or something to drink.
Tom has some projects he is working on to show us, and we will be talking about the final details of our upcoming show.
The show will be just the night of the Art Walk (Nov 14th)and will be in the Placer Building on the walking mall. Please bring your entry form to the meeting.
Directions to Tom's
Heading north on Benton take a left on to Meadow. Take the 1st right which is Fairway. Tom's house is 140 Fairway Drive. Phone: 443-2387
